What are the requirements of Customs container supervision
Browse：
Date：2019-02-27
1. The structure of the box (box) body is tight and complete. The sealing part of the box (box) body can be sealed by customs. If the goods are taken out or loaded by illegal means, the customs seal will be damaged or the opening marks will be left outside the box (box).
(1) The assembly mode of each component of the box (box) body (end wall, side wall, bottom plate, door, roof, corner post, longitudinal truss, cross beam, etc.) shall ensure that the components of the box (box) body can not be moved or replaced from the outside or the structure of the box (box) body is changed, otherwise obvious visible traces will be left.
(2) When the roof, side wall, bottom plate and door of the box (box) body are composed of different parts, these parts shall conform to the above requirements and have sufficient strength.There should be no concealed part in the box.
2. The box (box) body should have no concealed place to hide the goods.
(1) In order to prevent these parts from being used to conceal cargo, the lining of the inner part of the box (compartment) should not be moved or replaced, otherwise obvious visible marks will be left.
(2) In order to facilitate customs inspection, the number of structures with gaps mentioned above should be controlled to a minimum. Customs seals can be applied to boxes
3. Customs seals can be easily and effectively applied to boxes.
(1) Box (box) doors and other closing parts (including cut-off cocks, manhole covers, flanges, etc.) should be equipped with devices that can easily and effectively apply customs seals. Their structural design should ensure that the box (box) doors and all other closing devices cannot be opened from outside the box (box), otherwise the Customs seals will be damaged.
(2) The ventilation holes and drainage holes of the box (compartment) body shall be equipped with similar devices such as protective shields to prevent the ventilation holes and drainage hole
